Showing posts with label cold drinks. Show all posts
Showing posts with label cold drinks. Show all posts

Monterrey MT45151 Blender and Smoothie Maker with 48-Ounce Plastic Jar and Serving Spigot Review

Monterrey MT45151 Blender and Smoothie Maker with 48-Ounce Plastic Jar and Serving Spigot
Average Reviews:

(More customer reviews)
I bought this unit to make smoothies, as I did not have a lot to spend at the time, and I believe that as long as you treat the unit with care, it should last for awhile.
It actually has the equivalent of 6 speeds, as on the right side is has the 3 speed and pulse buttons, and on the left, a High and Low button: 3 LOW AND 3 HIGH speeds.
The Blades in this unit are EXTREMELY sharp, and that is likely the key to it working as good as it does!
I will throw in a bunch of Grapes, a whole Kiwi, a couple of Kale leaves, a handful of Spinach, a half an Orange, a half a Banana and a whole but small Pear, 4 big ice cubes and a cup of water.
I start it on low, (or sometimes repeatedly hit the pulse button) where it pulls everything down in about 15 seconds, and then I will shift it to the highest speed to grind everything to a liquid, which takes about a minute and a half.
After running it that long, the motor seems to emit a strange odor, but that seems to be decreasing. It is pretty noisy on the highest speed.
I then take the blade unit off of the bottom of the container and rinse everything thoroughly, then let air dry.
The spigot top will unscrew and can be cleaned this way, but since I never use it, I keep it closed, then just open it when rinsing.
The only part that is seemingly vulnerable to a leak is the gasket that goes between the blade assembly and the container. If you over-tighten, it will deform and leak. If you don't tighten it enough, it will leak. It took me a day or two to figure how much to tighten it. You can see the gasket and it's contact to the container while tightening. If it starts to appear wiggly, you are over-tightening it. The seal between the actual blade shaft and base has not leaked.
I know this is not a Vita-Mix or Blendtec, but it will make good smoothies with that crazy sharp blade, and grind ice to non-existence in short order.
The only question now is, "how long will it last?", especially in daily use.
I bought this after seeing a Blendtec demo at Costco and wanted to see how I would fare personally by adding fruits and vegetables to my diet each day via smoothies, and I can tell you that I have lost 3 pounds this week so far, and feel absolutely great as compared to the sluggish me before.
The price I paid was about an 1/8th of the Blendtec, but don't think for one minute that the quality is anywhere close. It works, but for how long???

Click Here to see more reviews about: Monterrey MT45151 Blender and Smoothie Maker with 48-Ounce Plastic Jar and Serving Spigot

Whether used for breakfast smoothies before work, protein shakes after a workout, or frozen cocktails with friends on a Friday night, this convenient appliance might be best left out on the counter for easy, everyday access. Simple to use, just add liquids, then ice or frozen ingredients, and with the lid in place, choose from low, medium, or high push-button speed settings--or "pulse" for short bursts of power. The unit's 450-watt motor and ice-crushing blades ensure fast blending, while its integrated stir stick forces ingredients into the mixing blades for smooth, even results. Furthermore, the blender comes with a large 48-ounce plastic blending jar, which features a secure-fitting lid, a non-drip pouring spout, and a mess-free dispensing spigot for serving thick, blended drinks right into a glass. With its contemporary, easy-to-clean design, the blender and smoothie maker measures 8-2/7 by 6-1/2 by 15-1/2 inches.

Buy NowGet 67% OFF

Click here for more information about Monterrey MT45151 Blender and Smoothie Maker with 48-Ounce Plastic Jar and Serving Spigot

Thermos Raya 18-Ounce Hydration Bottle, Purple Flower Review

Thermos Raya 18-Ounce Hydration Bottle, Purple Flower
Average Reviews:

(More customer reviews)
I have been on a quest for the perfect water bottle, and this one almost makes it--but not quite. For some background, my criteria are that the bottle must be BPA-free, have a straw (for easier drinking without having to tip my head back while driving), have a large-mouth lid that screws all the way off (for easier cleaning/filling), and something insulated would be nice. I have always been a fan of my CamelBak for the easy flip-out, no-spill straw, but was hoping to find something in stainless steel or ideally with double-wall insulation. This bottle's design looked like a winner. I love that this bottle is double-walled, insulated stainless steel. No worries about BPA, and it truly keeps your water cold for an amazingly long period of time, with no condensation on the outside. Hooray, I don't have to find a free coaster for every room in the house! But most of all, I find that I drink a lot more water throughout the day when it stays fresh and cold, so the insulation was a huge selling feature for me. However, the implementation of the cover/drink mechanism leaves a lot to be desired. Considering how solid and indestructible the stainless steel body is, I'm surprised they made the cover so cheaply. The pop-up cover gets in the way a little bit (I vastly prefer the sturdier, streamlined CamelBak flip-out straw design). But what's worse is the flimsy latch that keeps the lid shut. The very first time I dropped this water bottle (with the lid shut, although granted it did fall about 4 feet onto a hard floor), the plastic latch broke, so now the lid is permanently open and the bottle is useless to take anywhere (although I still use it at home because I love how it keeps my water cold). And how hard would it have been to include any type of finger loop or spot to attach a carabiner clip? It's moot for me at this point considering the lid is broken anyway, but just for picking it up and carrying it around the house, if I have my hands full with other things, it's so much easier to pick up a water bottle by a loop with one finger rather than having to grasp it fully with my hand. Finally, a choice of a larger size (~24 oz.) would be nice. I realize with the insulation this would probably make the bottle too wide for most car cupholders, but perhaps they could keep a section of the bottom narrow and just widen the top. Unfortunately 16 oz. just doesn't last as long for me as the water stays cold in this bottle! If this bottle hadn't broken the first time I dropped it, I would have given it 4 stars. If Thermos would add a loop and offer a 24-oz. size, I would give it 5 stars, no question. If insulation is important to you and you realize the lid will probably break at some point, you may still appreciate this bottle; but as for me, I'm still on a quest for the perfect water bottle.

Click Here to see more reviews about: Thermos Raya 18-Ounce Hydration Bottle, Purple Flower

Stay hydrated all day long and express your personal style with the fun and fashionable Thermos Raya Hydration Bottle, which provides an 18-ounce capacity and can keep beverages cold for up to 18 hours. Its TherMax double wall vacuum insulation locks in temperature to preserve flavor and freshness, and the container stays cool to the touch with hot beverages and is condensation-free with cold. It has an unbreakable, BPA-free stainless steel interior and exterior, and its tall, sleek body fits most automobile drink holders. The hygienic push-button lid includes a pop-up straw for easy access to your beverage. This bottle measures 9-1/4 inches tall and 2-1/2 inches in diameter. Hand wash only.

Buy NowGet 2% OFF

Click here for more information about Thermos Raya 18-Ounce Hydration Bottle, Purple Flower